SKSApps.com - Console Applications - Gaming

 
Go Back   SKSApps.com - Console Applications - Gaming > Playstation 3 > Ps3 General

News Forums HardDrive List Ps2 Apps Ps3 Apps Wii Apps Skins Arcade


Search Site

Ps3 General Upgrades, News, Updates, All Ps3 Stuff.


Reply
 
Thread Tools Search this Thread Display Modes

Reply With Quote windrider is offline
  #1 Old 11-15-2012, 11:24 PM
windrider
Donator
 
windrider's Avatar
 

Join Date: Aug 2007
Location: Alberta
Posts: 208
Rep Power: 27 windrider will become famous soon enoughwindrider will become famous soon enough

Default Rogero CEX-4.30 v1.04 / multiMAN ver 04.11.11 / Showtime 04.01.208




Updated on Sunday 11/Nov/2012 to ver 1.04





Link -------> Rogero_CEX4.30_V1.04.PUP
Mirror1 ---> Rogero_CEX4.30_V1.04.PUP
Mirror2 ---> Rogero_CEX4.30_V1.04.PUP
Mirror3 ---> Rogero_CEX4.30_V1.04.PUP
Mirror4 ---> Rogero_CEX4.30_V1.04.PUP
Mirror5 ---> Rogero_CEX4.30_V1.04.PUP
Mirror6 ---> Rogero_CEX4.30_V1.04.PUP




Mirror1 ---> Rogero CEX-4.30 v1.04 PlayStation Home Fix

Just Install and Run this package to have a working PlayStation Home Icon under the TV/Video Category.


Link ------->multiMAN ver 04.11.11 BASE CEX (20121111).pkg Released by DeanK


v1.04
- Removed all the Demo Mode nodes from XMB (No more demonstration mode messages).
- Added some fixes to the PUP to eliminate many "Data Corrupted" messages from different installation methods.
- Updated the PlayStation Home Fix Package to v1.04, Now PS Home Icon will be installed to the TV/Video Category.

* For details about Updating from any CFW to CFW4.30 v1.04 Please read the Update Guide below

* For details about Downgrading back to CFW/OFW3.55 Please read the Downgrade Guide below

* For details about Recovering from a Brick please check this thread --> Brick-Recovery Procedure.

ATTENTION:

1- This CFW doesn't have LV1 checks disabled and can't be installed on Downgraded PS3 consoles unless you have Dehashed/Reset Syscon Properly (if you're not sure about your PS3, Dehash it anyway to avoid any risk) Link ----> Dehashing Tutorial

2- Always make a NOR/Nand dump using multiMAN or memdump before installing any CFW to have a recovery backup in case of any bricks.
Having a valid NOR/Nand dump is an essential step before upgrading, because you will always have a way to recover (using hardware flashers) when you have a valid dump.
** A Hardware Flasher alone without a valid dump may not fix your bricked PS3 **

3- The QA flag must be always Enabled on your PS3 for safer upgrading/downgrading operations.Link ----> toggle_qa.pkg

4- Always use the Recovery Menu while installing this CFW to avoid possible bricks (XMB update works, but Recovery Menu is safer).

6- Please Check the MD5 of the downloaded PUP file before installing any CFW to avoid possible bricks.

7- DO NOT HAVE DISC IN PS3 WHEN UPDATING FIRMWARES..As the PS3 will take the UPDATE from the DISC First.

8- You need to already be on 3.55 to install this. Installing from any firmware other than 3.55 will simply not work


Downgrading back to 3.55 is always possible using the following steps :
- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP
...Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- While on Rogero CFW4.30, go to System Update from XMB and install the Downgrader PUP.
- After the Downgrader PUP installs you'll be on a hybrid CFW3.55 that will still shows ver4.21/4.30 from system settings.
- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any CFW 3.55/4.21/4.30.

Useful Hint ( for Slims / FATs with NOR Flash only ):
you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0



- Updating from CFW3.55/4.21/4.30 to the CFW4.30 v1.04 should be done using the following steps :
1- Proper Way ( CFW4.21/4.30 --> CFW3.55 --> CFW4.30 v1.04 )
---- If you are on any CFW newer then 3.55, Downgrade back to Rogero CEX3.55 v3.7 using the guide above.
---- Once on Rogero CEX3.55 v3.7, start the PS3 into Recovery Menu and Install (original) OFW3.55.
( This step may not be needed for all consoles but better do it )
---- Once on (original) OFW3.55, start the PS3 into Recovery Menu again and update into CFW4.30 v1.04.

2- Alternative Way ( CFW4.21/4.30 --> Recovery Menu --> CFW4.30 )
---- You can try updating from CFW4.21/4.30 to CFW4.30 v1.04 from Recovery Mode.
---- If it didn't work, then you'll have to use the first Proper Way ( CFW4.21/4.30 --> CFW3.55 --> CFW4.30 v1.04 )


- Changing/Upgrading the HDD while on Rogero CFW4.30 should be done using the following steps :
- Download the Downgrader PUP ---> Downgrader PUP mirror ---> Downgrader PUP
Size 176MB (184,595,263 bytes) MD5: 49d80e07fc1f5ca1b0840e02e94635db
- Rename the downloaded file to "PS3UPDAT.PUP" and put it on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP"
- Swap the current HDD with the New HDD, Turn the PS3 on, follow screen instructions and let it install the Downgrader CFW.
- After the Downgrader CFW installs you'll be on a hybrid CFW3.55 that will still shows ver4.21 from system settings.
- Enable QA flag by following these steps:

1- Download the Rebug QA_Toggle package from here ---> toggle_qa.pkg
2- Put the "toggle_qa.pkg" on USB and Install it on the PS3.
3- Run the "Rebug Toggle QA" from XMB, the screen will go Black and you will see HDD Led activity then if all went fine you will hear 2 or 3 Beeps and the PS3 will Restart back to XMB.
4- If you want to make sure QA flag was set, go to "Network Settings" then apply the following key combo (all at the same time):

L1 + L2 + L3 (press left stick) + R1 + R2 + dpad_down

You should see Edy Viewer, Debug Settings, and Install Package Files if done correctly.

- Now put "Rogero CEX-3.55 CFW V3.7" on your USB in: "USB\PS3\UPDATE\PS3UPDAT.PUP" ---> Rogero CEX-3.55 CFW V3.7.PUP
- Start the PS3 into Recovery Menu and install "Rogero CEX-3.55 CFW V3.7" (from Recovery Menu, this is important)
- Once you're back on Rogero CFW3.55 v3.7 Start the PS3 into Recovery Menu and install any CFW 3.55/4.21/4.30.

Useful Hint ( for Slims / FATs with NOR Flash only ):
you can simply use CondorStrike's Updater package from XMB to enter Recovery Menu directly from XMB without going through several restart/shutdown sequences. --> Condor Updater v2.0




Credits to :
- PS3DevWiki for the valuable and always up-to-date source of information.
- Deank for his continuous efforts on Multiman and many other PS3 tools/fixes.
- Tortuga-cove staff for the support forum.
- Andoma for his work on his excellent Showtime Media Player.
- All the Beta-Testers and all Tortuga-Cove members for their support and patience.

Source
Reply With Quote

Sponsored Links
Reply

Tags
cex430, multiman, rogero, showtime, v104, ver

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rogero CEX-4.30 v2.00 / CEX-4.21 v2.00 / multiMAN ver 04.12.00 / Showtime 04.01.224 windrider Ps3 General 1 02-04-2013 02:22 AM
Rogero CEX-4.21 CFW v1.00 Free for All windrider Ps3 General 1 10-22-2012 05:47 PM
Rogero CEX-4.21 CFW v1.00 Free for All windrider Front Page News! 1 10-22-2012 05:47 PM
how to install Rogero Manager 7.9c to ps3 help me aniketmax Ps3 General 1 01-30-2011 09:19 PM
multiMAN ver 1.12.00 Released Tarkan Ps3 General 0 01-04-2011 02:33 AM


All times are GMT -7. The time now is 03:55 PM.



News Forums HardDrive List Ps2 Apps Ps3 Apps Wii Apps Skins Arcade



Sitemap
Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 SKSApps.com
All rights reserved.
No affiliation with Sony Computer Entertainment, Microsoft Corp or Nintendo Company, Ltd.